This is a Torque plugin for Malaysian made Proton cars, particularly for Campro engines older than 2010. Read real time data, read error codes.!!
This is the free version with limited sensors/parameters and features. More parameters (a lot more..!) and features are available in the paid version. Try this free version and if you like it, please buy the full version from Googleplay..!
In the meantime try this free version and please revert to me for issues. My email address as below.
Prerequisite:
1. This is a Torque plugin. You need to get Torque installed in your device. This plugin will NOT work alone.
2. You need ELM327 compliant adapter. Make sure you do not use ELM327 version 2.1 which does not support k-line communications. Get adapters confirmed to work from me or from ahmad hamidon (youu can get it from http://bit.ly/obd2malaysia ).
3. Please also make sure you follow the instruction below. And make sure connection to ECU is OK before scan error, erase error or check the status to avoid app crashes.
Installation procedures:
This plugin is for Proton cars. New vehicles with CFE engine does not require any setup. Vehicles with older CAMPRO and CPS engines are supported and requires special setup as below:
1. This plugin requires full access to OBD device. Check the 'Allow plugin full access' in Settings --> Plugins
2. Create a new vehicle profile in Torque. Under Menu, select 'Vehicle Profile'. then click 'create new profile'...,
3. Name the profile 'PROTON'. Scroll to the bottom and click 'Show advance settings'
4. Scroll to the bottom. In 'Preferred OBD Protocol' select 'ISO 14230(fast init,10.4baud)'
5. Click 'Save'
6. Create another vehicle profile and name it 'Blank' scroll to the bottom and 'Save'. Do not put any advanced settings
7. Select the Proton CPS vehicle profile you created earlier every time you want scan CAMPRO engines other than CFE by tapping on Menu --> 'Vehicle Profile'-->select the ones that you created. For other vehicles, use the 'Blank' profile.
8. Create custom PIDs from Settings --> Manage extra PID/Sensors --> tap settings and select 'Add predefined set'. Select 'Proton PIDs'.
9. Create displays in 'Realtime Information' by tapping Realtime Information --> go to empty page -->tap menu --> Add display -->pick your meter type --> Select PIDs that start with {PROTON}.
10. Make sure you go to this page every time you want to use PROTON cars. Otherwise, Torque wouldn't connect to your ECU. You may need to wait for a while for Torque to connect to your ECU
11. Now you are ready to use the Torque for scanning your car.
12. To scan error codes (or other features in the paid version), tap on this plugin logo (PROTON OBD). Please make sure connection to ECU is OK before scanning to avoid apps crashes
Dies ist ein Drehmoment-Plugin für Malaysian gemacht Proton Autos, vor allem für Motoren Campro älter als 2010. Lesen von Echtzeitdaten, Fehlercodes lesen. !!
Dies ist die kostenlose Version mit eingeschränkten Sensoren / Parameter und Funktionen. Weitere Parameter (viel mehr ..!) Und Eigenschaften sind in der Vollversion verfügbar. Versuchen Sie, diese kostenlose Version und wenn Sie es mögen, kaufen Sie bitte die Vollversion von Googleplay ..!
In der Zwischenzeit versuchen, diese kostenlose Version und mir bitte für Fragen zurück. Meine E-Mail-Adresse wie unten.
Voraussetzung:
1. Dies ist eine Drehmoment-Plugin. Sie müssen Drehmoment in Ihrem Gerät installiert werden. Dieses Plugin wird nicht alleine arbeiten.
2. Sie müssen ELM327 kompatible Adapter. Stellen Sie sicher, dass Sie nicht ELM327 Version 2.1 verwenden, die nicht k-line-Kommunikation unterstützt. Holen Adapter bestätigt, von mir zu arbeiten oder von ahmad Hamidon (youu kann erhalten sie von http://bit.ly/obd2malaysia).
3. Bitte beachten Sie auch sicherstellen, dass Sie den Anweisungen unten folgen. Und stellen Sie sicher den Anschluss an ECU vor Scan-Fehler in Ordnung ist, Fehler löschen oder den Status überprüfen, um App-Abstürze zu vermeiden.
Installationsverfahren:
Dieses Plugin ist für Proton-Autos. Neue Fahrzeuge mit KSE-Motor benötigt keine Setup. Fahrzeuge mit älteren CAMPRO und CPS-Motoren werden unterstützt und erfordert eine spezielle Einrichtung wie folgt:
1. Dieses Plugin erfordert vollen Zugriff auf OBD-Gerät. Überprüfen Sie die 'Allow-Plugin vollen Zugang' in Einstellungen -> Plugins
2. Erstellen Sie ein neues Fahrzeugprofil in Drehmoment. Unter Menü wählen Sie ‚Fahrzeugprofil‘. Klicken Sie dann auf ‚neues Profil erstellen‘ ...,
3. Nennen Sie das Profil ‚PROTON‘. Blättern Sie nach unten und klicken Sie auf ‚Show bereits vorgenommenen Einstellungen‘
4. Blättern Sie nach unten. In 'Preferred OBD-Protokoll' wählen Sie 'ISO 14230 (schnell init, 10.4baud)'
5. Klicken Sie auf ‚Speichern‘
6. Erstellen Sie ein anderes Fahrzeugprofil und nennen es ‚Blank‘ nach unten scrollen und auf ‚Speichern‘. Verwenden Sie keine erweiterten Einstellungen setzen
7. Wählen Sie das Proton CPS Fahrzeugprofil, das Sie zuvor erstellt jedes Mal, wenn Sie Scan CAMPRO Motoren wollen andere als CFE, indem Sie auf tippen Sie auf Menü -> ‚Fahrzeugprofil‘ -> wählen Sie diejenigen, die Sie erstellt haben. Für andere Fahrzeuge, verwenden Sie das ‚Blank‘ Profil.
8. Erstellen von benutzerdefinierten PIDs von Einstellungen -> Manage zusätzliche PID / Sensoren -> Tippen Sie auf Einstellungen und wählen Sie 'vordefiniertes Set Add'. Wählen Sie 'Proton PIDs'.
9. Erstellen Sie Anzeigen in 'Realtime Information' von Realtime Informationen tippen -> zur leeren Seite -> Tippen Sie auf Menü -> Add-Anzeige -> wählen Sie Ihren Zählertyp -> Select PIDs, die mit {PROTON} starten.
10. Stellen Sie sicher, dass Sie auf diese Seite gehen jedes Mal, wenn Sie PROTON Autos verwenden möchten. Andernfalls würde Drehmoment nicht auf Ihre ECU verbinden. Sie können für eine Weile warten müssen für Drehmoment auf Ihre ECU verbinden
11. Jetzt sind Sie bereit, um das Drehmoment verwenden für Ihr Fahrzeug zu scannen.
12. Fehlercodes scannen (oder andere Funktionen in der Vollversion), tippen Sie auf diesem Plugin-Logo (PROTON OBD). Bitte stellen Sie sicher, den Anschluss an ECU ist OK vor dem Scannen apps Abstürze zu vermeiden